ABSOLUTE WIRELESS INC. is absolutely your BEST RESOURCE for GPS Fleet Tracking, Wireless and Data

Home > Cellular Phone Signal Boosters > In-Building Signal Boosters

In-Building Signal Boosters

Absolute Wireless specializes in In-Building Signal Boosting Systems that enable a clear cellular signal to be received and transmitted into a large building, office, or home for better cellular reception. Our systems are designed to work on your current phone providers network, and are functional with all makes and models of cell phones.

Direct Connection Signal Booster System

In-Building Wireless Signal Booster Systems

Connects Directly into Your Phone With an Adapter Puts the improved signal directly into your cell phone or cellular data card through a coaxial cable and adapter and gives you maximum signal performance for rural or remote locations. • Requires a physical cable connection to your phone or cellular data card • No signal loss because of the direct connection • Best performance in rural or remote locations • Can be used in buildings • Adapters available for most phone and cellular data card models • Must have an external antenna Each Direct Connection Signal Booster System contains an Signal Booster, a 6-foot coaxial extension cable that connects to an external antenna adapter (not included), and a power cable that plugs into a 12-volt cigarette lighter adapter. You will also need at least one outside antenna and at least one length of coaxial cable to connect the antenna to the Signal Booster. Antennas, cables and a 120-volt AC/DC power supply for in-building use are sold separately.

Requires No Physical Connection to Your Phone – It’s Wireless Transmits and receives an improved wireless signal inside your home or building and requires no physical connection to your phone. • Requires no physical cable connection to your phone or cellular data card • The system can be used by multiple phones and cellular data cards • Works with all cell phone and cellular data card models • A little more expensive than a direct connection Signal Booster • Inside signal range may vary with signal strength • Must have an outside antenna and an inside antenna Each In-Building Wireless Signal Booster System contains an Signal Booster and a power supply that plugs into a standard 120-volt wall outlet. You will also need at least one inside and one outside antenna and at least two lengths of coaxial cable to connect each antenna to the Signal Booster. Antennas and cables are sold separately.

 

Please contact info@absolutewirelessinc.com or call 510 782-4284 for more information.